By accepting these services, we are able to show you videos or other media content hosted by external providers. is equipped with a user-friendly brush applicator, simplifying the precise and controlled application of adhesive onto the 3D printer’s heated bed. Then, only some water is needed to easily clean your printing surface and your 3D printer is ready for your next printing. ensures that the first layer of each 3D print adheres securely to the build plate surface, making sure the print starts well and stays in position.

Depending on the 3D printed material, the effect may vary, which is why it is highly recommended to test the 3DLac Stick with certain materials ( ABS, PP, Nylon or advanced polymers) before 3D printing the final part. To use this product you only need to press the applicator against the printing surface for a couple of seconds and once the adhesive flows, it spreads a light layer of product over the printing area. If the removal is problematic, the part with the base can be placed in a fridge and the piece will be released only with a light touch. Tip: Before you remove the printed parts or the print model from the plate, wait until the temperature drops below 30 °C! The cap should be put back on the bottle after each use, as failing to do so will cause the applicator to dry.On the one hand, there is the traditional spray lacquer version that allows the product to be easily and quickly expanded; and on the other hand, the new version in liquid vaporizer that allows to concentrate more the product and avoids that it is finished sticking it in the mechanical parts of the 3D printer as it usually happens with the 3DLac in spray due to a bad use of it.

Once the printed piece gets cold, it can be taken off smoothly and without any damage to your 3D printed project. is a high quality anti warping adhesive that you spray to your heated print bed to help your prints stick.

A light 3DLAC mist over the surface is enough to completely hold the first layer of plastic to the base. With the stick you can easily lubricate various surfaces, so that your printed object is perfectly adhered in place. We’re dedicated to enhancing your nylon 3D printing experience with a comprehensive nylon starter pack.